Blog
What kind of map is it? Is it like the land use approval map? Is it a final plat map?
A utility service area map Texas developers receive shows who can serve water and sewer, not what a land use approval map or final plat shows.
It is most likely a utility service area map Texas developers receive, not a land use approval map or a final plat. A utility service area map shows which utility can serve the land with water and sewer. The map's source, legend and agency tell you which one you have.

What does a utility service area map show?
It shows the area a utility is authorized or proposed to serve. In Texas, the Public Utility Commission's Water and Sewer CCN Viewer (opens in a new tab) page is live and embeds an online map. That viewer is a starting point for identifying the utility. A CCN map is about water and sewer service. It does not answer what you can build, what the utility's capacity is, or what a connection will cost.
How is that different from a land use approval map?
A land use approval map shows what the city will let you build, not who can serve it. If the map came from a city planning department and shows zoning, future land use, or an approved site plan, it is a land use approval map. It answers entitlement questions: allowed use, density, setbacks, and site layout.
A utility service area map answers a service question: which utility can serve the tract. You need both for a land deal, but they are not interchangeable. A land use approval does not create water or sewer service, and a utility service area map does not approve your site plan.
How is it different from a final plat?
A final plat is the recorded subdivision map, not a utility service area map. The City of Boulder, Colorado (opens in a new tab), describes a final plat as "a drawing of a subdivision that receives approval signatures and is recorded with the County as the 'official' record of the subdivision." A final plat shows lot lines, easements, dedications, and the legal layout of the subdivision.
It is not a sewer or water plan. San Bernardino County's subdivision map approval steps (opens in a new tab) list the final map alongside street improvement, drainage, sewer and water plans as items that must be approved. If the map has a county recording number and shows lot lines, it is a plat. If it shows a shaded service area, it is a utility map.
What if the map shows a three-mile radius around a wastewater plant?
A three-mile radius map is a proximity exhibit, not a service area map. TCEQ's wastewater regionalization policy (opens in a new tab) uses a three-mile radius. The policy says the presence of a wastewater treatment facility or wastewater collection system within three miles of a proposed new or expanded facility is not an automatic basis to deny an application.
That means a nearby plant or collection system within three miles is not an automatic basis to deny your application. It shows an area TCEQ may consider under its regionalization policy. It is not a final plat, and it is not a land use approval.
How do I tell which map I have?
Look at the source, the legend, and the agency the map goes to. The source and legend usually identify the map faster than the title does. Use these checks:
- If it comes from the Public Utility Commission and shows a utility service area, it is a CCN map.
- If it comes from city planning and shows zoning or a site plan, it is a land use approval map.
- If it has a county recording number and shows lot lines and dedications, it is a final plat.
- If it shows a radius around a plant or collection system, it is a proximity or service exhibit.
What should I check before I rely on the map?
Check the source, date, legend, and the decision the map supports. A map that answers the wrong question can send a land deal in the wrong direction. Use this numbered readiness check:
- Does the map name the agency that produced it?
- Does the legend define every shaded area and line?
- Does the map show a date or a source note?
- Does the map answer the question you are asking: who can serve, what can be built, or what was recorded?
- Have you confirmed the map against the agency's current online viewer or the recorded plat?
You are ready to rely on the map only when every item is yes. If any item is no, ask the agency or your engineer for the current source before you close. This article explains map types in general. It does not replace a title review, a utility will-serve letter, or a surveyor's plat.
Frequently asked questions
What is a CCN map?
It is the Public Utility Commission's online Water and Sewer CCN Viewer. The PUC publishes it as an online map.
Is a final plat a utility map?
No. A final plat is the recorded subdivision map. It shows lot lines and dedications, not which utility serves the land.
Does a three-mile radius decide who serves my land?
No. TCEQ's regionalization policy says a facility within three miles is not an automatic basis to deny an application.
Who publishes the Texas CCN viewer?
The Public Utility Commission of Texas publishes the Water and Sewer CCN Viewer.
What map shows what I can build?
A land use approval map from the city planning department shows zoning, allowed uses and site plan approvals.
Can a utility service area map show capacity?
No. A service area map shows who can serve. It does not show whether the utility has capacity, what conditions it will require, or what a connection will cost.
Related resources
Not sure which map you are looking at?
MES helps Texas developers identify the maps that control water and sewer service before a land deal closes. We review the utility service area, the plat and the agency record, then tell you what each one means for your project.
Ask for the first step: pre-acquisition utility screen. A written answer on CCN status, capacity, discharge location and rights, pathway, cost range and permit calendar (15 business days). Ask for it here.
Keep reading
More to read
What we do
On this page
- What does a utility service area map show?
- How is that different from a land use approval map?
- How is it different from a final plat?
- What if the map shows a three-mile radius around a wastewater plant?
- How do I tell which map I have?
- What should I check before I rely on the map?
- Frequently asked questions
- Related resources
- Not sure which map you are looking at?
Planning a project?
Get a feasibility reviewTalk to an engineer
Tell us about your project
An engineer reads it
Not a salesperson. Someone who can tell you whether the pathway is real.
You get a first answer
Your options, the agencies involved and the questions that decide cost and schedule.
You decide
No commitment to have the first call.
Prefer the phone? (214) 833-6748